Performance Ford Northwest Club Logo Sticker
- Club Logo Sticker
- Small & Large
- Fast Dispatch
- Lead Time 5 Days
How to apply your Club Stickers
Start With A Clean Surface
Pre-wash the area where you’ll be applying the sticker using either soap and water. After cleaning with soapy water, rinse thoroughly with water until no soap or residue remains. Do not use window-cleaning products. They may leave a residue behind, making your sticker cling less effectively.
Apply When Temperatures Are Moderate
For the best results, install your stickers in a shaded area away from direct sunlight. When possible, you should apply stickers when the temperature is above 10c and below 33c.
Tend To The Transfer Tape
Many of our stickers come with three layers: 1) transfer tape, the clear top layer that clings to the non-adhesive side of the sticker and holds the sticker together; 2) the sticker, the middle layer; 3) backing paper, the bottom layer of white paper that clings to the adhesive side of the sticker.
Before applying these types of stickers, it’s important to make sure the sticker and transfer tape are pressed firmly together. To do so, apply pressure evenly across the transfer tape with a squeegee or a plastic card. This will ensure that the sticker doesn’t come up with the backing paper during installation.
Also, once you’ve applied your sticker, be sure to leave the transfer tape in place for at least 3 hours and up to 24 hours before gently removing it.
